We at Heat Pumps Dublin provider offer an attractive alternative to the traditional fossil fuel means of heating our homes. The benefits are reduced costs and reduced carbon emissions.
There are different types of heat pumps Ireland including:-
Air-to-Water heat pumps heat water which is then circulated around the home via radiators or an underfloor heating system. They can also be used to heat water in a storage tank for the bathroom or kitchen.
Ground Source to water heat pumps, exhaust air-to-water, water-to-water
Air-to-Air heat pumps. Air-to-Air heat pumps which typically use fans to circulate warm air around the home and are not used to heat water.
Air Source Heat Pumps take energy from the air outside (even when it’s cold) and uses it to heat the home. You can also get heat pumps that do the same thing using the energy in the ground and in water, but Air Source Heat Pumps tend to be suitable for a wider range of properties.
Air Source Heat Pumps are considered as a form of renewable energy as they take energy from the outside air (which has been heated by the sun) and transfers this energy into the home, even though the pump itself is powered by electricity.
Heat pumps are very efficient electrical devices in Ireland that convert energy from the outside of the home into useful heat in the home, in the same way a fridge extracts heat from its inside. They even work in Ireland’s cold winters. This extracted heat can then be used to heat the home and hot water.
Air-to-Water Heat Pumps are very efficient, with typical Coefficient of Performance (COP) of about 4.
This means that for every unit of electricity used in the Heat Pump gives out about four units of heat. They are especially suited to well insulated houses and are very economical to run. They are an extremely efficient alternative to fossil fuel-based heating systems.
Heat Pump Grants in Ireland
EnergyCraft bring you a range of Heat Pump options specifically suited for installation into new build homes and also into older existing homes in Ireland . These include Heat Pumps which are designed to work at higher temperatures with traditional radiators and/or underfloor heating.
EnergyCraft offer Heat Pumps from PHNIX, one of the largest manufacturers of Heat Pumps in China.
PHNIX specialises in the R&D and production of heat pump products and energy-saving solutions. Nearly 70% of PHNIX products are exported to Europe, North America and other overseas markets.
HERO SERIES DC INVERTER HEAT PUMP
DC Inverter Heat Pumps utilise advanced heat pump technology to achieve high efficiencies with a COP of up to 4.8. With the application of DC inverter technology, these series of units can adjust the output capacity automatically and control the room temperature accurately.
The intelligent control system means everyone in the family can control the unit. Due to the monobloc design, the units are cost effective, space saving and quiet running. All of these features work together to give you a more comfortable home.
Energy Saving up to 30%
With the use of inverter compressors, brushless DC fan motors and PFC controls, the output of the units can be regulated. There are no frequent start and stops with the result that the energy consumption is 30% less than that of standard heat pump units.
0.5 oC Precise Control
The units can change the operating frequency of the compressors automatically according to the heating or cooling demand. When the target temperature is reached, the units run at a lower frequency, and the temperature control accuracy can be as precise as 0.5oC.
Speed up Heating/Cooling Time
When there is a large difference between the actual temperature and the programmed temperature, the unit can run at a higher frequency to make fast heating or cooling to increase or decrease the temperature rapidly.
Traditional Defrosting Method
Traditional defrosting method is with fixed defrosting time and start temperature. Once the ambient temperature reaches or is lower than -7oC, the unit will start defrosting. It's easy to cause energy wasting when there is no defrost and will reduce the heating performance at the same time.
Intelligent Defrosting Method
Hero series intelligent defrosting uses pressure sliding defrosting technology to figure out the exact defrosting time and start pressure according to the real ambient temperature. It saves energy and makes the heat pump work in high efficiency.
With the use of the special liquid distribution technology, in heating mode, the temperature of refrigerant in the air exchanger’s bottom copper tube will not decrease in order to ensure no frosting on it and smooth drainage.
PHNIX self-developed controller with glass panel and touch screen can be installed on the wall inside the home. It provides you with a convenient way to control the heat pump and is applicable to RS485 communication.
PHNIX DC Inverter Heat Pumps can work efficiently underfloor heating, fan coils or radiators. The monnobloc design makes it easy for outdoor installation.
While Heat Pumps Dublin work best when supplying water at a low temperature of say 35oC to underfloor heating they can also work with standard radiators with outlet water temperature of 55oC.
For more information about PHNIX DC Inverter Heat Pumps Ireland prices & portfolio, please visithttps://www.phnix-e.com/dc-inverter-heat-pump.html